BoatsArena

Harris FloteBote Pontoons for Sale

Harris is one of the oldest pontoon names in the country. It started in Fort Wayne, Indiana, in 1957, it still builds there, and it now belongs to Brunswick. You'll find decades of used Harris boats on the lakes of Indiana, Michigan and Wisconsin, from steel-era relics to triple-tube boats that run close to 50 mph.

Seventy years in Fort Wayne

Brothers Ernie and Pete Harris founded Harris Manufacturing on February 7, 1957, after testing pontoons on northeast Indiana and southern Michigan lakes in the early 1950s. Pontoon & Deck Boat magazine says they got the idea from people building rafts out of oil drums and aircraft drop tanks, and set out to make a cleaner product with steel fences and better tubes. A dealer's history credits Harris with the Dolphin nose cone in 1959, anodized fence rails in 1964, the first sterndrive pontoons in 1971, the 1983 purchase of fiberglass deck boat builder Kayot, and a patented interlocking aluminum deck in 1988. The same list includes the 1985 Heritage, with an extended deck over the engine, the 1990 Classic CF with a rear entry gate, and the 1995 Liberator, built for owners with physical disabilities. Brunswick bought Harris-Kayot in September 2005, and Boating Industry reported the company would stay in Fort Wayne.

The Solstice 240 on test

Gary Reich tested a Solstice 240 for boats.com in December 2014 with a 250 hp supercharged Mercury Verado Pro. It is 25 feet 4 inches long with an 8-foot-6 beam, 3,588 pounds and 50 gallons of fuel. The Performance III package added a lowered 25-inch center tube, lifting strakes and a full aluminum skin. Top speed was about 46 mph, and cruise was about 24 mph at roughly 7 gallons an hour. The Harris rep aboard told him to turn harder. He also noted the 3/4-inch pressure-treated tongue-and-groove plywood decking on C- and Z-channel crossmembers at 4- to 10-inch spacing, sealed in four steps, and a limited lifetime warranty on the structure.

What they cost

Boat Trader prices in fall 2026 started under $10,000 for a 1991 240 at $5,995 and a 1998 220 Classic at $6,995, both in Clarklake, Michigan. A 2006 Crowne 250 was $16,500 in Lansing and a 2008 240 Super Sunliner $19,900. A 2014 Grand Mariner 230 was $27,900, and a 2012 Grand Mariner SL 250 was $39,900 at Lake of the Ozarks. New 2026 Cruiser 210s and 230s were $31,999 to $54,494 at Wisconsin dealers. Tri-toon Cruiser 250s were $58,704, and 2026 Solstice 250s were $91,967 to $93,150. A 2022 Crowne SL 270 was $163,944 in Yulee, Florida.

Buying checks for a Harris

Know which deck it has. Most Harris boats have plywood decks under the vinyl. Walk every square foot and look for soft spots, especially at the gates.

Check the tubes. Look for dents, chalky corrosion around welds and pitting on boats kept in brackish water.

Check the fence and furniture. Look at the rail welds, gate latches and the vinyl seams on the seats. Sun-rotted foam is common on lake boats.

Match the horsepower to the tubes. A twin-tube Cruiser won't take a 250. A tri-toon Solstice needs it.

0 boats for sale

No listings yet — sell your boat here.

Frequently asked questions

Where are Harris pontoons built?

In Fort Wayne, Indiana, where the company was founded in 1957.

Who owns Harris FloteBote?

Brunswick, which bought Harris-Kayot in 2005.

How fast is a Harris Solstice?

boats.com saw about 46 mph from a Solstice 240 with a 250 hp Mercury Verado Pro.

What does a used Harris pontoon cost?

Fall 2026 listings ran from about $6,000 for a 1991 240 to $163,944 for a 2022 Crowne SL 270.

Sources

Browse all boats for sale →